Air Washer Filters Suppliers - Enviro Tech Industrial Products Delhi India
Air Washer Filter
lies in offering our clients an excellent quality range ofAir Washer Filter at the most
cost effective prices. Only high quality raw material is used while manufacturing the offered range,
for increased compliance with international standards of quality. This is widely used in pharma
processing units, chemical & fertilizers plants and hospitals. The offered range is highly
appreciated among clients for its high quality and compact design. Clients can avail the offered
filter from us at highly affordable prices.
filters are of many types and are designed, manufactured, and applied to meet a wide variety of
industrial and commercial requirements for clean air.
Commercially available filters are
divided into three distinct categories based on how they operate to remove suspended particulate
matter from the air passing through them.
The largest category, often referred to as
ventilation or heating, and air conditioning (hvac) filters, is composed of highly porous beds of
resin-bonded glass or plastic fibers.
Technotech airflow systems offer air filters, which
protect the equipment and delicate instruments from the dirt, water, and oil usually, found in
Our filters remove these contaminants at an efficiency rate of 99.
99% for 0. 01-micron particles and droplets.
serve escalating requirement of our clients we are committed towards offering a wide range
of ROD Frame Type
Pre Filter. Our
skilled professionals manufacture the entire range by using well-tested raw material and sophisticated
technology. In addition to this our offered filter is rigorously tested by our quality controllers
against diverse parameters in order to deliver a defect-free range at clients end. Moreover, the
offered filter is extensively appreciated by our clients for featuring variegated attributes like low
maintenance and sturdiness.
Construction: Are made from high quality synthetic non-woven media, supported by
stitching HDPE media on both sides. Media is then stitched and housed inside a rod frame.
Our technical expertise
enables us to manufacture and supply a high quality range of Panel Filter. The offered panel filters
are manufactured in compliance with international quality standards using excellent quality raw
material and sophisticated technology. These panel filters are designed with high precision and tested
on various quality parameters. In, addition to this we offer these panel filters in various technical
specifications at highly competitive prices.
A) Large air flow and low resistance
B) Temperature and moisture
C) High acid and alkali resistan
Dust Air Filter
1) Application: Filter Dust be widely used in Fan Coil Unit Diffuser and
the Indoor equipments with the large Air Flow also applied to the prefilteation of the air
conditioning system and the clean room
2) Outside Frame:
Aluninum alloy or nylon mesh
3) Media: PP, PA, PE
4) Inside frame: Galvanized or stainless
5) En779 class: G1, G2
6) Average arrestance: < 65%
Rated Air Flow
( mm )
( M3/H )
( Pa )
In case specifications structural changes to
the latest data provided by the company, which ever is the concern of this update please attention the
companys Web site.)
,.We accept the orders
of non-standard specifications, but the prices separately negotiable)
Keeping track of the latest market
development, we are introducing a wide range ofPre Filter. Offered in varied sizes and specifications as
per the application requirements of our clients, this filter is manufactured using superior quality
raw material and employing contemporary technology. In addition, our quality examiner conduct a series
of test on this range in order to eradicate any kind of defect in it.
High dust holding capacity
Enviro Tech Pre Filters Are Most Suited For :
Air handling units (ahus), air-
conditioning systems, power plants, chemical and fertilizer complexes, green houses, automatic drain
holes, paint shops, textile mills, cement factories, laminar air flow units, biosafety hoods, fan
filter units (ffu), gas turbine industry, compressor, diesel engines, nuclear power station, cd-rom
production industry, picture tube production industry, semi-conductor industry, aeronautical industry
Pre filters are manufactured from high density polyethylene mesh which has excellent
washable properties as compared to other filter media. Since this filter encounters maximum dust
loading, such washable property ensures longer service life of the filter. These filters can be
offered in non woven synthetic media and can be supplied either in flange type or box (cassette) type
construction. The filter can be supplied in MS, Aluminium or Stainless Steel frames.
Heating, Ventilation & Air Conditioning
Thermal power plants
Nuclear power plants,
research organizations & nuclear installations
These filters are widely used in Fresh Air supply , AHU systems.Central
A/C Units, Fan coil Units etc.. With synthetic non woven media /HDPE they are designed to give an
efficiency of 90% down to 10 to 20 microns,Similar to micro fine, they are also made as box types or
Flange types. Usual sizes available are
Construction:are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.
Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Available in flange or box type
Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
HDPE and non-woven synthetic.
No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
PU based epoxy
No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Athlete Pre filters are most suited for:
Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.